The 8-09 and 9-12 high-pressure centrifugal blowers

These blowers are all single-suction. The 8-09 type blower has five model numbers designed by our factory: N26.8A, 7.1D, 8D, 8.5D, and 9D. The 9-12 type blower has six model numbers designed by our factory: N6.8A, 7.1A, 7.4D, 7.7A, 8D, and 9D. The 8-09 and 9-12 blowers can be manufactured in two types: clockwise rotation or counterclockwise rotation. Viewed from the motor end, if the impeller rotates clockwise, it is called a clockwise blower, indicated by “clockwise”; otherwise, it is called a counterclockwise blower, indicated by “counterclockwise”. The outlet position of the blower is indicated by the outlet angle of…

Category: Centrifugal Fan

Description
Reviews (0)

Description

The 8-09 and 9-12 high-pressure centrifugal blowers are special blowers that are used with 1, 2, 3, 5, and 7 t/h iron melting furnaces. They can also be used as blowers for various furnaces and forging furnaces, for conveying air and non-corrosive, non-self-igniting gases without sticky substances. Other similar performance blowers can also be selected. The temperature of the conveyed medium must not exceed 80℃, and the content of dust and hard particles in the medium must not exceed 150 mg/m³. ³。